MC4 Connector Assembly

Approx. Rs 100 / PieceGet Latest Price

elmex PV Solar Fuse Terminal Block EPVFH1000 is suitable for photovoltaic application & applicable for string protection. It is designed for use in connection for photovoltaic devices like DCDB, Inverters, String Combiner boxes, etc. which is used for rooftop or ground mounted projects. The fuse terminal block is constructed as per standard IEC 60269-1 & are suitable for cylindrical gPV fuse size ø 10 X 38 mm. In order to dissipate heat generated in fuse terminal blocks, spacer can be used which works to provide 5mm space between two fuse terminal blocks, thus facilitating air circulation through this clearance.

Approx. Rs 70 / PieceGet Latest Price

MC4 connectors (I & Y type) are a type of contact connector commonly used for connecting photovoltaic panels. While small solar panels, commonly used for battery charging, may not require special connectors, larger terrestrial arrays for power generation involve higher currents and voltages and place special demands on both cables and connectors for safe operation. The MC4 connectors incorporate a flexible watertight seal and are supplied as ''male (plug)'' and ''female (socket)'' types to minimize the chance of wrong connections. For proper seal, they require usage with the correct diameter cable, normally double-insulated (insulation plus black sheath) and U.V. protection (as UV rays tend to damage the connection). Connection is by use of a special crimping tool, although they may be soldered.

Special features of Elmex MC4 connectors:

• Cable connectors for Photovoltaic applications

• Protection level IP67, fully dust tight and water resistant

• High robustness

• Provides UV protection to the connection

• Totally finger safe

• High operation life (up to 25 years)

• Tested and approved as per international standards (UL 1073, DIN V VDE V 0126-3/12.06)

• Plug and Socket Design

• Low resistance contacts

• Connection by crimping or soldering

• Special locking arrangement

• Vibration resistant

Technical Details of Elmex MC4 Connectors :

Approx. Rs 625 / EACHGet Latest Price

elmex introduces 6.2 mm, One Changeover & Solid State, terminal unit along with 14.5 mm Two Changeover Relay Terminal Unit for C & I and Automation industry. 6.2 mm housing makes it an obvious choice for space constraint applications. Relay Terminal Units are designed for mounting on TS 35 TOP HAT rails compliant to DIN Standards.

These Relay Terminal Units are available for 24V DC/AC and 220v DC/AC actuating signals.

Additional Information:

• Minimum Order Quantity: 50 EACH

Approx. Rs 60 / PairGet Latest Price

ELMEX PHOTOVOLTAIC STRAIGHT CONNECTOR 

'elmex’ has developed solar straight connector with plug & Socket design suitable for 2.5, 4, & 6 sq.mm, size cables and are constructed using flame retardant engineering thermoplastic suitable for photovoltaic application and exposure to UV rays. While small solar panels, commonly used for battery charging, may not require special connectors, larger terrestrial arrays for power generation involve higher currents and voltages and place special demands on both cables and connectors for safe operation. The EMPV4 connectors incorporate a flexible watertight seal and are supplied as ‘male (plug)’ and ‘female (socket)’ types to minimize the chance of wrong connections. For proper seal, they require usage with the correct diameter cable, normally double-insulated (insulation plus black/red sheath) and UV protection (as UV rays tend to damage the connection).